-
Power OSSO MS 3000
Kode : KA.365
Specifications:
o Full Range Output
ü 8 ohm Stereo Power : 700 W + 700 W
ü 4 ohm Stereo Power : 1050 W + 1050 W
o Frequency Response (+0/-0.5Db) : 20 HZ – 20 KHz
o Input Sensitivity (rate Power at 8 ohm) : 0 Db (1.0 V)
o Input Impedance (balanced) : 20K ohm
o Signal / Noise Ratio : >95 dB
o Damping Factor (1 KHz, 8 ohm) : >300 : 1
o Circuit Type : Class H
o Dimension (W x D x H)mm : 482 x 495 x 133
o Protection : short circuit, current limited DC fault, AC line fuse, limiter, thermal cut off power, up/down transient, soft start
-
Osso Graphic Equalizer Type SEQ-6231 MK II
OSSO PRODUCT FEATURES :
INPUT
Connectors : 1/4” Phone Jack, XLR & Barrier Strip
Type : Active Balanced
Impedance : 20 K ohm
Max Input Level : +23dBu
OUTPUTS
Connectors : 1/4”TRS, male XLR (pin 2 hot)
Type : Servo – Balanced
Source Impedance : 200 ohm
Min. Load Impedance : 600 ohm
Max Output Level >+23dBu
Overall
Frequency Response : ±.23dB
Total Harmonic Distortion : <.01% @ + 20dBu IM Distortion (SMPTE) : <.01% @ + 20dBu Output Hum & Noise (unweighted) : < -92dBu Channel Separation : >95dB @ 1KHz
Gain Control : – to + 6dB
(EQ in, all faders flat, 20Hz-20KHz unless otherwise noted)
Filters
Type : Constant Q / Wein Bridge
Bandwidth : 1/3 octave
Tolerance : ± 3%
Range : ± 6 or ± 15dB
Subsonic Filter : 12dB / oct. 14 – 280Hz
Power Requirement
Nominal Voltage : 240 VAC, 50-60Hz
Minimal Voltage : 120 VAC
Power : 24W
Weight : 15 lbs
Dimensions (WxDxH) mm : 150X482X150
Constant “Q” design with low ripple and accurate response near the “Flat” setting.
Precision Wein-bridge Filters for accurate Response and low distortion.
Switchable high pass filter.
High Quality Detented metal-Shaft fader.
Frequency Sliders Feature Center Detent “Off”.
Worldwide XLR, 1/4”, and Euroblock Outputs.Prices: Call
-
Osso Graphic Equalizer Type SEQ-3231 F
OSSO PRODUCT FEATURES :
INPUT
Connectors : 1/4” TRS, female XLR (pin 2 hot)
Type : Electronically balanced/ unbalanced, RF filtered
Impedance : Balanced 40k ohm, unbalanced 20k ohm
Max Input Level : >+21dBu balanced or unbalanced
CMRR : >40dB typically >55dB at 1kHz
OUTPUTS
Connectors : 1/4”TRS, male XLR (pin 2 hot)
Type : Impedance-balanced/unbalanced, RF filtered
Impedance : Balanced 100 ohm, unbalanced 50 ohm
Max Output Level : >+21dBu balanced/unbalanced into 2k ohm or greater
>+18dBu balanced/unbalanced (into 600 ohm)
SYSTEM PERFORMANCE
Bandwidth : 20Hz to 20kHz, -0.5/-1dB
Frequency Response : <10Hz to >50kHz, +0.5/ -3dB
Dynamic Range : 108dB
Signal to Noise : 90dB
THD + Noise : <0.004% Interchannel Crosstalk : <-80dB, 20Hz to 20kHz FUNCTION SWITCHES EQ Bypass : By passes the graphic equalizer section in the signal path High Cut : Variable Low Cut : Variable Filter : 18dB/oct POWER CONSUMPTION Operating Voltage : 100VAC 50/60Hz, 120VAC 60Hz, 230VAC 50/60 Hz Power Consumption : 15w Main Connection : IEC receptacle DIMENSIONS (HxWxD) mm : 132 x 482 x 200 Weight Kg : 4.2 Prices: Call -
Osso Graphic Equalizer Type SEQ-1231 XL
OSSO PRODUCT FEATURES :
INPUT
Connectors : 1/4” TRS, female XLR (pin 2 hot)
Type : Electronically balanced/ unbalanced, RF filtered
Impedance : Balanced 40k ohm, unbalanced 20k ohm
Max Input Level : >+21dBu balanced or unbalanced
CMRR : >40dB typically >55dB at 1kHz
OUTPUTS
Connectors : 1/4”TRS, male XLR (pin 2 hot)
Type : Impedance-balanced/unbalanced, RF filtered
Impedance : Balanced 100 ohm, unbalanced 50 ohm
Max Output Level : >+21dBu balanced/unbalanced into 2k ohm or greater
>+18dBu balanced/unbalanced (into 600 ohm)
SYSTEM PERFORMANCE
Bandwidth : 20Hz to 20kHz, -0.5/-1dB
Frequency Response : <10Hz to >50kHz, +0.5/ -3dB
Dynamic Range : 108dB
Signal to Noise : 90dB
THD + Noise : <0.004% Interchannel Crosstalk : <-80dB, 20Hz to 20kHz FUNCTION SWITCHES EQ Bypass : Bypasses the graphic equalizer section in the signal path Low Cut : Activates the 50Hz 12dB/octave high-pass filter Range : Selects either +/-6dB or +/-12dB slider boost/ cut range POWER SUPPLY Operating Voltage : 100VAC 50/60Hz, 120VAC 60Hz, 230VAC 50/60 Hz Power Consumption : 15w Main Connection : IEC receptacle DIMENSIONS (HxWxD) mm : 132x482x200 Weight Kg : 6 Prices: Call -
Osso Graphic Equalizer Type SEQ-231 XL
OSSO PRODUCT FEATURES :
INPUT
Connectors : 1/4” TRS, female XLR (pin 2 hot)
Type : Electronically balanced/ unbalanced, RF filtered
Impedance : Balanced 40k ohm, unbalanced 20k ohm
Max Input Level : >+21dBu balanced or unbalanced
CMRR : >40dB typically >55dB at 1kHz
OUTPUTS
Connectors : 1/4”TRS, male XLR (pin 2 hot)
Type : Impedance-balanced/unbalanced, RF filtered
Impedance : Balanced 100 ohm, unbalanced 50 ohm
Max Output Level : >+21dBu balanced/unbalanced into 2k ohm or greater
>+18dBu balanced/unbalanced (into 600 ohm)
SYSTEM PERFORMANCE
Bandwidth : 20Hz to 20kHz, -0.5/-1dB
Frequency Response : <10Hz to >50kHz, +0.5/ -3dB
Dynamic Range : 108dB
Signal to Noise : 90dB
THD + Noise : <0.004% Interchannel Crosstalk : <-80dB, 20Hz to 20kHz FUNCTION SWITCHES EQ Bypass : Bypasses the graphic equalizer section in the signal path Low Cut : Activates the 50Hz 12dB/octave high-pass filter Range : Selects either +/-6dB or +/-12dB slider boost/ cut range POWER SUPPLY Operating Voltage : 100VAC 50/60Hz, 120VAC 60Hz, 230VAC 50/60 Hz Power Consumption : 15w Main Connection : IEC receptacle DIMENSIONS (HxWxD) mm : 132x482x200 Weight Kg : 6 Prices: Call -
Osso Speaker System Type OS 218 H
OSSO PRODUCT FEATURES:
Type of Enclosure : Bass Reflex Turbo Design
Components : 1 x 18? Low Frequency Subwoofer
Power Handling : RMS 1200W – peak 2400W
Frequency Response : 20 Hz-200Hz
Nominal Impedance : 8 ohm
Sensitivity : [email protected] : 100dB
: peak spl : 136dB
Dispersion : Horizontal 90 degrees, Vertical 60 degrees
Input Connections : 2 x NL 4 MP – 4 pole speakon passive loop thru
Transport : Four Transport Handles
Weight (kg) : 138
Dimension (HxWxD)mm : 650 x 1200 x 800
Prices: Call -
Osso Speaker System Type OS 118 H
OSSO PRODUCT FEATURES:
Type of Enclosure : Bass Reflex Turbo Design
Components : 1 x 18? Low Frequency Subwoofer
Power Handling : RMS 600W – peak 1200W
Frequency Response : 20 Hz-200Hz
Nominal Impedance : 8 ohm
Sensitivity : [email protected] : 100dB
: peak spl : 136dB
Dispersion : Horizontal 90 degrees, Vertical 60 degrees
Input Connections : 2 x NL 4 MP – 4 pole speakon passive loop thru
Stand Fitting & Handling : Stand adapter & Two Transport handles
Weight (kg) : 57
Dimension (HxWxD)mm : 512 x 735 x 705Prices: Call
-
Osso Speaker System Type OS 118 E
OSSO PRODUCT FEATURES:
Type of Enclosure : Bass Reflex
Components : 1 x 18? Low Frequency Subwoofer
Power Handling : RMS 600W – peak 1200W
Frequency Response : 40 Hz-200Hz
Nominal Impedance : 8 ohm
Sensitivity : [email protected] : 100dB
: peak spl : 136dB
Dispersion : Horizontal 90 degrees, Vertical 60 degrees
Input Connections : 2 x NL 4 MP – 4 pole speakon passive loop thru
Stand Fitting & Handling : Stand adapter & Two Transport handles
Weight (kg) : 47
Dimension (HxWxD)mm : 630 x 550 x 640Prices: Call

Product Categories
Top Rated Products
-
Mic Wireless PROTEA PT 202 V
Dinilai 5.00 dari 5 -
Speaker Aktif SOUNDCREST SC-3315 A
Dinilai 5.00 dari 5 -
Speaker 18" Soundking FA 1808
Dinilai 3.00 dari 5